The appearance of stains on the tile in the kitchen and bathroom is a common and inevitable phenomenon. No matter how hard you try, but drops of fat and water fall on the tile. Of course, the patterned tiles are not so visible drips, but the stains on the grout and the stale appearance of the surface is difficult not to notice. For high-quality cleaning it is important to choose the tools that remove pollution and do not damage the surface.
Clean kitchen: how can you clean the tiles?
The problem of grease stains in the kitchen is familiar to almost all housewives. If you finish cleaning each cooking, then the perfect cleanliness will not leave the room, but there is not always time to clean up the mess, especially to clean the tiles in the kitchen from fat. Sometimes drops of oil can fall on the ceiling tile, and there should be options than to wash the tile from fresh and old fat spots.
It is not always possible to gently cover the walls and protect the surface from splashes of paint, some chemical compounds. Sometimes it is possible to wash the tiles in the bathroom after the repair with a damp cloth and it takes a little time, but basically removing the dirt causes a lot of trouble and forces us to resort to different methods.
How to wash the tiles in the bathroom after the repair?
During repair works various materials, mixes, liquids are used. When laying tile is difficult to protect the floor from dirt. Which cleaning products to use depends on the type of dirt: tile adhesive, grouting, primer, paint, cement.
Before removing stains of paints, it is advisable to know its composition. Oil dye is wiped with a cloth moistened in vegetable oil. How to wash the tile after repair of water-based paint spots? Very simple - laundry soap. To remove stains from other paints, chemical solvents are used (safe option is white alcohol, acacia-free nail polish remover).
At the end of the repair work sometimes there is a problem: how to clean tile from cement? When choosing a product, it is important to distinguish fresh stains from old cement contamination. Non-dried cement is removed with a damp cloth. The cement solvent will cope with old stains: a dirty area is plentifully moistened with a solvent and rubbed after softening (you can spend several hours on bulky stains).
Naturally, there is no universal remedy for all contaminants, so the effect of new unknown compounds is better to pre-check in a secluded, inconspicuous place.
During the day in the bathroom there are traces of washing, taking a shower and it is natural. Everyday effort is required to keep the room clean. Each housewife independently creates a set of detergents that helps to wash the surface in the bathroom. Thanks to simple actions, you can maintain a pleasant and fresh atmosphere in the room.
The seams between the tiles on the floor darken over time (from detergents, from dirt), because a special compound is used for grouting, in which a fungus and bacteria can appear from splashes, high humidity. Mold in the bathroom is very unhealthy. You can clean the joints between the tiles in the bathroom using special chlorine-containing products (whiteness, Domestos). The composition is applied for several minutes and thoroughly washed with water. Seams are well cleaned with fine-grained sandpaper - it is enough to rub the polluted area.